Autoclave Engineers Tools, Installation,Operation, Maintenance工具
Low Pressure “Speedbite”, Cone & Thread: Manual and Machine, Quick Set (QSS) Tooling
任何產品的安全、高效運行本質上取決于其正確安裝。本節說明了低壓、中壓和高壓接頭的準備和組裝。還包括中高壓錐螺紋連接和防振夾頭壓蓋組件的組裝程序。Safe, efficient operation of any product is inherently dependent upon its proper installation. In this section the preparation and assembly of low, medium and high pressure connections is explained. Also covered is the assembly procedure for medium and high pressure Cone & Thread Connections as well as anti-vibration collet gland assemblies.
Correct installation procedures are further promoted by providing dimensional information associated with a variety of Parker Autoclave Engineers tube connections as well as the torque required to properly seat numerous Parker Autoclave Engineers components. Several tools developed by Parker Autoclave Engineers are presented to help accomplish proper valve, fitting and tubing installation and maintenance. Video tutorials are available on our website (www.Autoclave.com) and a Setup & Operational DVD is sent with every Cone and Thread Machine.
When installing or maintaining any pressure component, common practice dictates the use of proper safety equipment at all times.
Inside you will find:
- Installation Instructions for Low Pressure "Speedbite" Single Ferrule Bite-Type Compression Fittings
- Part numbers and Installation Instructions for both Medium and High Pressure Manual Cone & Thread Kits and Accessories
- Assembly and Installation Instructions for Anti-Vibration Gland Assemblies
- Part numbers and Specification detail for Cone & Thread Machine (required for all tubing sizes above 9/16")
- Connection Torque Values (for both Standard and Special Materials)
- Connection and Packing Gland Nut Sizes, Torque Wrenches and Crows Foot Wrench Adapters
- Reamer Part Numbers for cleaning up Connection Sealing Surfaces
- Valve Packing, Running and Seating Torque Values
- Male and Female Connection reference drawings with dimensions with connection names
- Manual Make-up and Installation instructions for Quick Set System (QSS) - only 1/4" and 3/8" tube sizes
- Hydraulic Set Up Tool for Quick Set System (HST) - All Sizes
- Part Numbers and Specifications for the Hydraulic Tube Bender (HTB)
- Maintenance and Lubrication site locations for various Parker Autoclave Engineers valves with recommended Lubricants
Tools, Installation,Operation, Maintenance Autoclave Engineers Tools工具產品技術資料下載
Low Pressure “Speedbite”, Cone & Thread: Manual and Machine, Quick Set (QSS) Tooling
- Autoclave Engineers Tools, Installation, Operation & Maintenance
|
|
Speed-Bite Connections
快速咬合連接
快速咬入壓縮連接件的安裝
Installation of Speed Bite compression connections |
Manual Coning and Threading Tools
手動錐螺紋加工工具
尺寸小于等于9/16“油管的手動錐形和螺紋工具
Manual coning and threading tools for sizes up to 9/16" tubing |
 |
|
Quick Set System (QSS) Connection
快速設置系統（QSS）
Installation of QSS Compression Connections
連接QSS壓縮連接件的安裝 |
Hydraulic Sleeve Set Tool
液壓套筒定位工具
Hydraulically compress sleeves up to 3/4"，設計用于QS系列壓蓋和套筒。該工具可快速方便地將套管壓縮到油管上。 |
|
 |
Anti-Vibration Collet Gland Assembly
防振夾頭壓蓋總成
Anti-Vibration Collet Gland Assembly Procedure防振夾頭壓蓋裝配程序 |
Re-Seating Tool
重新安裝工具
High and medium pressure female connection re-seating tool. 高壓和中壓陰螺紋連接重新固定工具。 |
|
|
Electric Coning and Threading Machine
電動加工工具
訂購型號：AEGCTM-2 and
符合CE認證型號： AEGCTM-2E-CE coning and threading machine. 用于Coned-and Threaded錐面和螺紋加工的切屑刀具
|
Torque Wrench, Wrench Adapters and Torque Values
扭矩扳手、扳手適配器和扭矩值，微調力矩扳手
Adjustable torque wrench with adapters for valves and tubing connections. Tables of torque values required for repair and installation of valves and tubing.閥門和管道連接用帶適配器的可調扭矩扳手。閥門和管道修理和安裝所需扭矩值表。 |
|
|
| Tubing Connections 管連接
Tube connection details for low, medium, and high pressure connections. . 管連接細節，用于低、中、高壓連接 |
Hydraulic Tube Bender 液壓彎管機
Hydraulic tube bender for Autoclave Engineer's tubing. 高壓釜工程師用液壓彎管機。 |
|
|
Autoclave Engineers Hydraulic Tube Bender with Single-stage Hydraulic Hand Pump - HTB
液壓彎管機
用于高壓管道的彎曲。彎管機配有泵、油缸、機架和彎管工裝，以上部件全部可裝在帶鎖的便攜箱中。
訂購型號HTB。
UOM: EA
Tube O.D: 1/4 to 1 Inch (6.35 to 25.4mm)
Tool Type: Tube bender
Tool Sub-type: Tool |
Autoclave Engineers Hydraulic Tube Bender with Single-stage Hydraulic Hand Pump - HTB
液壓彎管機
用于高壓管道的彎曲。彎管機配有泵、油缸、機架和彎管工裝，以上部件全部可裝在帶鎖的便攜箱中。
訂購型號HTB。
UOM: EA
Tube O.D: 1/4 to 1 Inch (6.35 to 25.4mm)
Tool Type: Tube bender
Tool Sub-type: Tool |
P-AE微調力矩扳手
力矩扳手手柄訂購型號：P-1680 20-150 ft.lbs.(27~203Nm）；91020 75-250 ft.lbs.(102-339Nm）
精確調節 Parker Autoclave Engineers閥門填料壓蓋和連接端螺」母的扭矩至關重要。這種扳手手柄可調節一定范圍的力矩，并可更換扳手替換頭用于配合1/2”到1-7/8”的六角頭。下表為扳手轉換頭型號。Accurate tightening for all Parker Autoclave Engineers valve packing glands and tube nuts is essential. The wrench can be adjusted to the ranges shown and is used with interchangeable wrench adapters for hex sizes from 1/2” through 1-7/8”. Part numbers for wrench adapters are listed on chart.
填料壓蓋或
六角螺母尺寸
扳手轉換頭型號P-1681 ,P-1682P ,P-1683 ,P-9813 ,P-1685 ,P-1686 ,P-1687P ,P-9901 ,
P-1688 ,P-1689 ,P-1690 ,P-6040 ,P-0076
液壓彎管機 Hydraulic Tube Bender
用于高壓管道的單向彎曲。 Parker Autoclave Engineers液壓彎管機一次設置后便可快速、精確而可靠地彎曲厚壁鋼管。彎管機配有泵、油缸、機架和彎管工裝，以上部件全部可裝在帶鎖的便攜箱中。(訂購號：HTB)氣動液壓泵可選。(訂購號：HTBA) For single pass bending of high pressure tubing. The Parker Autoclave Engineers hydraulic tube bender is designed to bend heavy wall tubing quickly, accurately and reliably with only one setup. The tube bender is complete with pump, cylinder, frame and bending shoes which are self-contained in a portable, lockable case.
Coned-and- Threaded電動加工工具 Coning and Threading Machine
訂購型號： AEGCTM-2G (符合CE認證型號： AEGCTM-2ECEG)
用于 Coned-and- Threaded錐面和螺紋加工的切屑刀具由單馬達驅動系統提供動力。該型號可對 Parker Autoclave Engineers中壓和高壓鋼管進行 Coned-and- Threaded錐面和螺紋加工。Ordering Procedure: Model # AEGCTM-2 (CE Version: Model #AEGCTM-2E-CE) Separate heads for coning and threading are powered by a single motor and drive system.Available models cone and thread Parker Autoclave Engineers medium and high pressure tubing.Approximate dimensions: 56” high, 28” wide and 20” deep (1.4 m x .7 m x .5 m).Shipping weight is 350 pounds (159 kg). Tooling ordered separately. Consult factory.
設備尺寸：高56″”，寬28”，深20”(1.4mx0.7mx0.5m。裝運重量為350磅(159kg)。加工刀具等零部件可單獨訂購。請咨詢我們。
AEGCTM-2
AEGCTM-2G
AEGCTM-2E-CE
AEGCTM-2E-CEG
AEGCTM-2WOH
AEGCTM-2EWOH-CE
特性
- 0.5hp馬達，115AC 60Hz ( 220AC, 50Hz) 電機。
- 加工螺紋時無需反轉，彈開式加工模具可防止螺紋損壞。
- 全套加工工具均有銷售，需指定工具的尺寸。
- 錐面加工采用進給輪，便于精確進料。
- 配套油泵和儲槽。
- 移動腳輪配置鎖定裝置便于移動和保持穩定。
- 切屑液儲槽加熱器可選。
- 220VAC 50Hz電機經CE標準認證
|
fcg.cnmec@parkerdistribution.com.cn
